HomeShop

All parts

Every listing says which openings it fits. Check your measurements on the part’s page, or start a plan and we’ll match parts for the whole house.

Find the vent for your opening

Enter the size of the hole in the wall. We check it against every vent’s documented range, the same rule your plan uses.

Your opening

Foundation and eave vents, or the duct size for a dryer.

How to measure

A tape measure and two minutes per vent.

Take the old vent off, or measure inside its frame.
Measure the hole edge to edge, across and then up. Not the face or flange.
Write fractions as 15 1/2. Count how many vents share that size.

Filters

13 results

Foundation vent, 8 × 16 in Openings 15½–16¼ in × 7½–8¼ in Request a quote

Eave vent, 3½ × 14¼ in Openings 13¾–14½ in × 3¼–3¾ in Request a quote

Stainless mesh, ⅛ in, 24 in × 10 ft Metal vents you keep, openings up to 22 in across Request a quote

Dryer vent hood, 4 in, metal flap 4 in dryer ducts. Never use mesh on a dryer vent Request a quote

Metal gutter guard, 5 in K-style, 40 ft 5 in K-style gutters, 40 ft per pack Request a quote

Metal gutter guard, 6 in K-style, 40 ft 6 in K-style gutters, 40 ft per pack Request a quote

Corner and end kit for K-style guards K-style guards, 4 corners per kit Request a quote

Garage door bottom seal, T-style, 20 ft ¼ in T-style retainers, doors up to 19 ft 10 in Request a quote

Garage door bottom seal, bead style, 20 ft ¼ in bead retainers, doors up to 19 ft 10 in Request a quote

Garage door side and top seal kit, 16 × 8 ft Doors up to 16 × 8 ft Request a quote

Exterior sealant, 10.1 oz cartridge Gaps ⅛ to ½ in wide in wood, fiber cement, stucco, vinyl, or masonry Request a quote

Backer rod, ⅜ in, 20 ft Gaps ¼ to ¼ in wide, 20 ft per coil Request a quote

Backer rod, ⅝ in, 20 ft Gaps ¼ to ½ in wide, 20 ft per coil Request a quote

Sets for one job

The parts that go together, priced as the sum of the parts once every one is on sale.

Garage door seal set, T-style

Bottom seal and side and top stops for one door up to 16 × 8 ft with a T-style retainer.

1 ×Garage door bottom seal, T-style, 20 ft
1 ×Garage door side and top seal kit, 16 × 8 ft

Request a quote

Garage door seal set, bead style

The same set for doors with a round-bead retainer.

1 ×Garage door bottom seal, bead style, 20 ft
1 ×Garage door side and top seal kit, 16 × 8 ft

Request a quote

Gutter guard set, 5 in, 80 ft

Twenty 4 ft panels and a corner kit: 80 ft of 5 in K-style gutter with up to four corners.

2 ×Metal gutter guard, 5 in K-style, 40 ft
1 ×Corner and end kit for K-style guards

Request a quote

Gap sealing set for siding corners

Two cartridges of exterior sealant and a 20 ft coil of ⅜ in backer rod: about 20 ft of ¼ in gaps at siding corners and trim.

2 ×Exterior sealant, 10.1 oz cartridge
1 ×Backer rod, ⅜ in, 20 ft

Request a quote

Every part at a glance

13 listings, each with the openings it fits and one status: available to buy now, or request a quote.

Every part, with what it fits and its status
Picture	Part	Fits	Sold as	Status	Action
Vents and meshSee all
	Foundation vent, 8 × 16 inItem EB-VNT-FND-0816	Openings 15½–16¼ in × 7½–8¼ in	Each	Request a quote	Request a quote
	Eave vent, 3½ × 14¼ inItem EB-VNT-EAV-0314	Openings 13¾–14½ in × 3¼–3¾ in	Each	Request a quote	Request a quote
	Stainless mesh, ⅛ in, 24 in × 10 ftItem EB-MSH-ROL-2410	Metal vents you keep, openings up to 22 in across	Roll	Request a quote	Request a quote
	Dryer vent hood, 4 in, metal flapItem EB-VNT-DRY-04	4 in dryer ducts. Never use mesh on a dryer vent	Each	Request a quote	Request a quote
Gutter guardsSee all
	Metal gutter guard, 5 in K-style, 40 ftItem EB-GTR-K5-40	5 in K-style gutters, 40 ft per pack	Pack of 10	Request a quote	Request a quote
	Metal gutter guard, 6 in K-style, 40 ftItem EB-GTR-K6-40	6 in K-style gutters, 40 ft per pack	Pack of 10	Request a quote	Request a quote
	Corner and end kit for K-style guardsItem EB-GTR-CRN-K	K-style guards, 4 corners per kit	Kit	Request a quote	Request a quote
Garage door sealsSee all
	Garage door bottom seal, T-style, 20 ftItem EB-GAR-BTM-T20	¼ in T-style retainers, doors up to 19 ft 10 in	Roll	Request a quote	Request a quote
	Garage door bottom seal, bead style, 20 ftItem EB-GAR-BTM-B20	¼ in bead retainers, doors up to 19 ft 10 in	Roll	Request a quote	Request a quote
	Garage door side and top seal kit, 16 × 8 ftItem EB-GAR-PER-16	Doors up to 16 × 8 ft	Kit	Request a quote	Request a quote
Gap sealingSee all
	Exterior sealant, 10.1 oz cartridgeItem EB-GAP-SLT-10	Gaps ⅛ to ½ in wide in wood, fiber cement, stucco, vinyl, or masonry	Each, 10.1 oz cartridge	Request a quote	Request a quote
	Backer rod, ⅜ in, 20 ftItem EB-GAP-ROD-38	Gaps ¼ to ¼ in wide, 20 ft per coil	Each, 20 ft coil	Request a quote	Request a quote
	Backer rod, ⅝ in, 20 ftItem EB-GAP-ROD-58	Gaps ¼ to ½ in wide, 20 ft per coil	Each, 20 ft coil	Request a quote	Request a quote